RIG I -16

CURRENT LOCATION: SE Turkey

NORMAL DRILLING DEPTH: 1400m w / 3 ½" DP.

TYPE: SKYTOP BREWSTER RR400
Year of construction: 1978
Nominal drilling depth with 3.5” DP: 1400 m.
Rig fuel storage capacity: 150 bbl
Total mud tanks capacity: 750 bbl (Total 3 Tanks)
Rig water tanks capacity: 200 bbls
Current location of rig: Edirne, West Turkey
Last Well drilled: IKIHOYUK-2 (Jan 2009)

DRAW-WORKS DETAILS:
Type: Skytop H14210 Model, Double Drum Draw-works
Rated input power: 450 HP
Line diameter: 1’’
Drive type: Detroit Diesel 8V71 diesel engine with Allison CLBT-750 Transmission
Main brake: 42 x 10 Brake System with brake spray water cooling
Auxiliary brake: Parmac 122-15” Hydromatic
Crown Strike protection: Crowm-O-Matic installed

MAST SPECIFICATIONS:
Type: SKYTOP BREWSTER, 96-210-XY
Hydraulically raised and scoped. Single three staged raised ram.
Total height from rig floor: 96’
Nominal capacity: Rated to 210,000 lbs. static hook load on 6 lines.
Racking system capacity of 3.5” DP: Double racking board for 7000 ft. of 3 ½’’ DP
Crown block-type: Skytop Speedkit
Crown block rated capacity: For 100 Ton Traveling  Block
Number of sheaves: 2 x 24’’, 2 x 20”, 1 x sandline sheave
Line diameter: 1”
Dead line anchor type: Dead line anchor without sensor
Type: Substructure assy.
Rig floor height: 12.1 ft.
Clear height beneath rotary beams: 10 ft.
Simultaneous capacity setback: 150,000 lbs.
Simultaneous capacity rotary beams: 150,000 irrespective of the set back capacity
Air winch-type: N/A

ROTARY TABLE:
Type: Continental Emsco (No compound from prime mover)
Maximum opening size: Table opening is suitable for 12 ¼’’ bit and 9-5/8’’ casing

TRAVELING BLOCK:
Type:
American Block
Rated capacity: 100 ton
Number of sheaves: 3 x 24’’ sheaves
Line diameter: 1”

HOOK:
Type: American Block
Rated capacity: 100 Ton

SWIVEL:
Type:
KING OIL, 3PS-14
Rated capacity: 85 tons static load, 55 tons @ 100 rpm dynamic load
Maximum RPM: 120 rpm at 4000 ft/lbs torque
Maximum working pressure: 3000 psi.

DRILL LINE:
Type: 6 x 19
Diameter: 1”

DRILLING RIG POWER DRIVE
ENGINES:

Type: Detroit Diesel 8V71 diesel engine
Number: 1
Power: 320 HP at 2200 rpm

Maximum RPM: 2200

TORQUE CONVERTERS:
Type: Allison CLBT-750 Transmission

PUMPING AND HIGH PRESSURE DISCHARGE SYSTEM:
MUD PUMPS

#1 -Model: PZ-8 triplex skidded with D379 CAT with torque converter. 

#2 - Model: TULSA Triplex TT660 AND GARDNER DENVER Triplex PAHB
Number: 2 X Tulsa, 1 X Gardner Denver
Drive: 525 hp / 275 hp
Maximum output hydraulic power: 525 hp / 275 hp
Maximum strokes per minute: 400 spm/
Liner sizes, inc: 3” to 6” liners / 3” to 5” liners
Flow rate with __max__ SPM: 881 gpm / 357 gpm
Maximum working pressure: 3500 psi / 3118 psi
Charge Pump Make and size: - / 4”x 5”
Suction line diameter: 3”x 6” / 5”x 8”

HIGH PRESSURE MUD LINE AND STANDPIPE:
ID: 2”
Maximum working pressure: 2000 psi

ROTARY HOSES:
ID:
2”
Maximum working pressure: 3000 psi
Length: 60’
Number: 2 each

LOW PRESSURE MUD SYSTEM
MUD MIXING EQUIPMENT:

Mixing hopper number: 1 x MI Swaco Hi Ride mixing hopper
Mixing pumps type and size: 8 x 6 x 14 centrifugal mixing pump
Mixing pump number: 2
Drive: 125 hp

SHALE SHAKERS:
Type and model: MI Swaco Mongoose
Number: 2 each
Drive: Electrical motor
Maximum flow rate: 1000 gpm
Screen sizes available: 50/84/120/165/200/230 mech.

DESILTER- MUD CLEANER:
Type: MI Swaco
Number of cones: 12
Feed pump type and size: MCM pump, 6 x 8
Feed pump drive: 75 hp electrical motor

MUD TANKS:
Total capacity including sand traps: 750 bbl
Active tank capacity: 630
Number of active tanks: 3
Number of suction tanks: 2
Suction tanks capacity: 500
Number of reserve tanks: 1
Sand traps tank capacity: 120 bbl

MUD AGITATORS:
Number per tank: 1/3/3 each per tank, total 7
Type and model: Swaco
Drive: 10 hp electrical motor

BLOWOUT PREVENTION AND WELL CONTROL EQUIPMENT
ANNULAR PREVENTER:

Type: SHAFFER 11 x 5000 PSI Bolt Lid Anular (API Certified 2007)
Annular ID: 11’’
Working pressure: 5000 PSI
Top connection: 11 x 5000
Bottom connection: 11 x 5000

TYPE E DOUBLE RAM, WITH
3 ½” RAMS:

Type: SHAFFER 11X3000 PSI (API Certified 2007)
Ram preventer ID: 11’’
Working pressure: 3000 PSI
Top connection: 11 x 3000
Bottom connection: 11 x 3000

BOP CONTROL SYSTEM:
Type:
Koomey Type 80-11S (API Certified 2007)
With electric & air pumps
Number of connected devices in operation: 1
System working pressure: 3000psi
Number of bottles: 8
Bottles capacity: 11 gallons
Remote panel: Yes

CHOKE MANIFOLD:
Size and working pressure: 2 9/16’’ x 2 1/16’’ x 3000 PSI

KILL MANIFOLD:
Type:
2 1/16’’ x 3000
Number of valves: 9

CHOKE LINE:
Number: 2 1/16’’ x 3000 PSI
Line ID: 2 1/16’’
Line working pressure: 3000 PSI

KILL LINE:
Number: 2 1/16’’ x 3000 PSI
Line ID: 2 1/16’’
Line working pressure: 3000 PSI

VACUUM DEGASSER:
Type: MI Swaco
Feed pump type: Flender Himmel, Type: 8654006
Feed pump drive: 25 hp electrical motor

OTHER WELL CONTROL EQUIPMENT:
String safety valves: Yes
Lower Kelly cock: Yes
BOP’s pressure test equipment: Cup type testers & 10,000 psi hand pump
Mud-Gas separator (Poor boy): Available, Made in Turkey

POWER PLANT
ENGINE-AC GENERATOR SETS:

Type: Caterpillar
Number: 2
Output volts: 350 KVA at 1500 rpm/180 KVA rpm
Model of generator: Cat 3412 / Cat 3306B

AIR COMPRESSORS:
Type of system:
Available

RIG FLOOR EQUIPMENT
ELEVATORS:

For 3.5” DP and 4 ¼’’DC: Available

For 9-5/8” Casing 9-5/8”: N/A

For 7” & 5” Casing: Yes
Model: SLX
Type: Side door type
Number: 2
Capacity: 65 tons

SLIPS:
For 3.5” DP: Available

For 4 ¼” DC: Available

ELEVATOR LINKS:
Type: Available

MANUAL AND POWER TONGS:  Oil Country
MANUAL ROTARY TONGS:
Type: Model 55700 Tubing Tongs
Size: 1.05” to 5.5”
Number: 1

POWER CASING TONGS:  FARR
Type: LW -9625, 12K Tong with Hydraulic Back up
Size: 4”-9 5/8”
Number: 1

LIFTING SUBS:
For _6 ¼”__” DC:
N/A

For _8”__” DC: N/A

OTHER RIG FLOOR EQUIPMENT
MASTER BUSHING:
Kelly bushings:
N/A
8-½”, 12 ¼” , 17 ½” Bit breakers: Available for 8-½” Bit and 6” Bit
Bit gauges: Available
9-5/8” Casing drift: N/A
7” Casing drifts Master bushing inserts tool:  Available

DRILLING STRING AND ASSOCIATED EQUIPMENT
DRILL PIPE SPECIFICATIONS:


3.5” DP, S-135, G-105, X-95 Grade
OD: 3 ½’’
WT (Weight): 12.5-14 ppf
Joint OD: 4-9/16’’
Connecting type: 3-½” IF
Average DP length: 31.5 ft.
Total length of DP set: 7.087 ft.
4.5” Short DP: N/A

HEAVY WEIGHT DRILL PIPE:
OD: N/A

DRILL COLLARS:
___4 ¼”__” DC
OD: 4 ¼’’
ID: 2 ¼’’
Connecting type: 2 7/8 IF
Number: 10


KELLY:
Type: N/A

SUBS SET:
Kelly safety subs: N/A
Bit subs: Available
Drill string subs: Available

STABILIZERS:
__string___” Stabilizers:
2 each, 8 ½” & 5 15/16” OD
__Near bit___”Stabilizers: 1 each, 8 ½” & 5 15/16” OD

RECORDING AND INDICATING EQUIPMENT
SENSORS:

Weight sensor: MD/Totco
Rotary table torque sensor: On Power Swivel Remote Panel
Rotary table RPM sensor: On Power Swivel Remote Panel
Standpipe pressure sensor: Stand pipe pressure gauge
Mud pump SPM sensor: Yes

DRILLER’S CONTROL PANEL:
Type:
M/D Totco
Location: Drillers consule
Show parameters: Weight indicator

DIRECTIONAL SURVEY EQUIPMENT:
Type:
MD Totco 7 degree AVAILABLE

FISHING TOOLS : N/A

OTHER RIG EQUIPMENT:
Water tank:
Available (Total volume – 200 m3. Equipped with two centrifugal pumps).
Main diesel fuel tank: Available (Volume -40 m3. Equipped with pumps, ventilation system and lightning protection).
Additional diesel fuel tank: Available (Volume - _______ m3).
Rat hole pipe: N/A
Mouse hole pipe: N/A
Set of welding equipment: Available
Gas-cutting machine equipment set: Available
Mud pumps valve seats pullout device: Available

WORKING AND STORAGE ROOMS:
Materials storage(container):
Available 
Warehouse / Camp Equipment
Kitchen caravan (at the rig site): N/A 

Dining and resting caravan(at the rig site for key personnel of contractor): Available
Dining and resting caravan(at the rig site) for company: Available

«BACK